Skip to main content

Radar Vehicle Detector Loop Detector for Boom Barrier Gate EX-RD01

Radar Vehicle Detector for Boom Barrier Gate EX-RD01


A leading brand tripod turnstile gate systems manufacturer supplier in China.

 

The EX-RD01 Millimeter-wave Radar Vehicle Detector for Boom Barrier Gate is the latest model of vehicle detector developed by Excelsoo with microwave broadband technology and high-speed digital signal processing technology. It is used for the control and management of vehicle entrance and exit barriers or pedestrian access doors to replace traditional loop vehicle detectors or infrared sensors.

 

It can avoid the phenomenon of vehicles following the car and pedestrians being smashed, and ensure the reliable landing of the barrier arm or the normal closing of the pedestrian access doors. It is suitable for the supervision and detection of vehicles at the entrances and exits of parking lots or underground garages and toll stations. It is an indispensable and important component of an intelligent parking system and a toll system!


EX-RD01 Radar Vehicle Detector includes two specifications: EX-RD01 and EX-RD01S.
EX-RD01: Dry contact * 1;
EX-RD01S: Dry contact * 2, RS485/RS232 bus *1.


- Center Frequency: 24 GHz;
- Coverage Range: 0 m～6 m;
- Distance Adjustment Range: 2.0 m～6 m (8 levels);
- Response Time: 100ms;
- Signal Output: Dry contact；
- Vertical Beam Width: 43°;
- Horizontal Beam Width: 11°.


Excelsoo Radar Vehicle Detector for Boom Barrier Gate EX-RD01

Excelsoo Radar Vehicle Detector for Boom Barrier Gate EX-RD01

Excelsoo Radar Vehicle Detector for Boom Barrier Gate EX-RD01


Labels:

Comments

Post a Comment

Popular posts from this blog

PD-132 Vehicle Loop Sensor for Boom Barrier Gate

Vehicle  Loops and PD-132  Loop Detectors are used to detect the presence of a vehicle to open a gate, or as a safety device to prevent the gate from closing on a vehicle ... PD-132 Loop detector in installed in barrier gate to detect verify if vehicle have finished passing through parking access control or parking ticketing lane. After car has completely passed through the boom gate, loop detector will give signal to barrier gate to start closing boom arm. The detector must be installed in a convenient weatherproof location as close to the loop as possible. Installation location must choose to stay away from the heat source, it around other devices must maintain a distance of at least 10mm (mustn’t fix cling to the cabinet). A correct loop configuration and detector installation will ensure a successful inductive loop detection system. Loop of several important parameters include: loop figure, size, and turns, install methods (details as “Loop installation guide”).   Excelsoo PD-132
1 comment
Read more

Information of Your Parking Lot: How to choose the equipment list (BOQ) of your parking lot?

 Information of Your Parking Lot How to choose the equipment list (BOQ) of your parking lot? Please complete the following questionnaires, which will help us understand your needs and provide system solutions & quotations accurately. 01.    Where Is This Parking Lots System Installed? Office Building           Apartments House            Shopping Mall            Other 02.    How Many Entrances And Exits Does The Parking Lot Have? Entrance                             Exit                          03.    What Are The Types Of Users In The Parking Lot? Temporary Visitor           Monthly User          Other 04.    How Do Temporary Visitors Enter The Parking Lot?   Take a Smart Card from entry unattended terminal;   Take a Paper Ticket from entry unattended terminal;   Get a card from the security booth by hand;   Other                                             05.    How to Pay For Temporary Visitors?   Pay at the cashier counter or auto-pay station in
Post a Comment
Read more

How do you install a loop sensor for boom barrier gate?

Excelsoo vehicle loop detector for barrier gate is used to detect the presence of car via inductance loop coil. Loop detector is installed in barrier gate to detect verify if vehicle have finished passing through parking access control or parking ticketing lane. After car has completely passed through the boom gate, loop detector will give signal to barrier gate to start closing boom arm. CAUTION ● Pay more attention to power supply voltage avoiding wrong connection damaging the detector. ● Please read the instructions carefully before usage. Loop Installation Using disc cutting machine or the like to cut cable slots, a 45°oblique angle should be made across the loop corners to reduce the chance of damage that can be caused to the loop cable at right angle corners. Suggested Width of Slots: 4mm Suggested Depth of Slots: 30~50mm    A slot must also be cut from the loop circumference at one corner of the loop to the roadway edge to accommodate the feeder.    A continuous loop
1 comment
Read more